Решение:
1. Обновить прошивку через web-интерфейс чистого маршрутизатора. Ссылка на прошивку
2. Подключить телефон в НИЖНИЙ порт маршрутизатора.
3. Выставить в "USB Connection Type" тип "DialUp"
4. Выставить настройки согласно скриншота:
5. Если все прошло успешно, в Status & Log -> System Log должно быть примерно следующее:
Jan 1 01:00:10 kernel: pl2303.c: Prolific PL2303 USB to serial adaptor driver v0.1
Jan 1 01:00:10 kernel: usbserial.c: USB Serial support registered for FTDI SIO
Jan 1 01:00:10 kernel: usbserial.c: USB Serial support registered for FTDI 8U232AM Compatible
Jan 1 01:00:10 kernel: usbserial.c: USB Serial support registered for FTDI FT232BM Compatible
Jan 1 01:00:10 kernel: usbserial.c: USB Serial support registered for FTDI FT2232C Compatible
Jan 1 01:00:10 kernel: usbserial.c: USB Serial support registered for FTDI FT232R Compatible
Jan 1 01:00:10 kernel: usbserial.c: USB Serial support registered for USB-UIRT Infrared Tranceiver
Jan 1 01:00:10 kernel: usbserial.c: USB Serial support registered for Home-Electronics TIRA-1 IR Transceiver
Jan 1 01:00:10 kernel: ftdi_sio.c: v1.3.5r1:USB FTDI Serial Converters Driver
Jan 1 01:00:16 pppd[140]: pppd 2.4.2 started by admin, uid 0
Jan 1 01:00:18 pppd[140]: Serial connection established.
Jan 1 01:00:18 pppd[140]: Using interface ppp0
Jan 1 01:00:18 pppd[140]: Connect: ppp0 <--> /dev/usb/tts/0
Jan 1 01:00:18 pppd[140]: CHAP authentication succeeded
Jan 1 01:00:19 pppd[140]: local IP address 92.49.255.244
Jan 1 01:00:19 pppd[140]: remote IP address 77.109.0.225
Jan 1 01:00:19 pppd[140]: primary DNS address 77.109.1.8
Jan 1 01:00:19 pppd[140]: secondary DNS address 77.109.1.9
Jan 1 01:00:19 dnsmasq[74]: read /etc/hosts - 5 addresses
Jan 1 01:00:19 dnsmasq[74]: reading /tmp/resolv.conf
Jan 1 01:00:19 dnsmasq[74]: using nameserver 77.109.1.9#53
Jan 1 01:00:19 dnsmasq[74]: using nameserver 77.109.1.8#53
Jan 1 01:00:21 USB Connection: connect to ISP
0 коммент.:
Отправить комментарий